
PS Engineering
PAC24 Series Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-240-0010 Page 1-3 Rev. 25, Feb. 2015
Specifications, Continued.
POWER REQUIREMENTS (Including Internal Lighting):
2.5 Amp (Externally protected by a 3 Amp circuit
breaker.)
Typical operating current:
Speaker off:
Speaker on, 28V, full radio volume
Audio Selector Specifications
Audio selector panel input impedance:
Speaker Output (into 4 ) with no clipping
14 VDC:
28 VDC:
3 Watts (min.)
10 Watts (min.)
10
(Com 1, Com 2, Com 3, Com 4, Com 5, Nav 1,
Nav 2, ADF, DME, MKR)
2
(examples: GPS WPT, Value, Autopilot Discon-
nect, Altimeter DH)
5
(Com 1, Com 2, Com 3 Com 4, Com 5)
38 mW each headset, no clipping <1% THD
120 mW each headset with < 10% THD into
150
Minimum of 5 places (with individual IntelliVox® cir-
cuits)
>-30 dB "Soft Mute" when Com or intercom active.
<1% THD @ 38 mW into 150
<10% THD @ 120mW into 150
Mic Freq. Response, 3 dB:
Music Freq. Response, 3 dB:
1.6 EQUIPMENT SUPPLIED
1 ea. of the following units:
PAC24 Audio Control Panel with intercom
PAC24 Audio Control Panel with intercom and digital recorder,
PAC24 Audio Control Panel for Observer installation
PAC24 Audio Control Panel for Observer with recorder
PAC24 Audio Control Panel with intercom, Vertical Orientation
PAC24 Audio Controller, Special Mission Version, Vertical
Observer (-04XX) units must be
dual installations, and cannot be
mixed with other part numbers.
Commenti su questo manuale